案例资源库

Lay-Up Simulations to Choose the Best Fabric Pattern for an Aeronautic Radome

This article focuses on weather radars mounted on small airplanes. They help planning routes before take-off and adapting during the flight depending on weather conditions.

Customer Stories

Energy Finite Element Analysis by MES used to Control Interior Aircraft Noise

With EFEA fewer elements are required compared to FEA, alternative designs can be evaluated rapidly enough in order to influence the design.

Customer Stories

Automating Structural Analysis of Satellites at OHB System AG

Mariana Mendes Leal, Structural Engineer at OHB System AG, talks about how they are able to automate their FE analysis workflow utilizing the Altair HyperWorks suite and tools like Altair’s Automated Report Director.

Customer Testimonials

Big Metal Printing – Realising the Potential of Additive Manufacturing

The South African aviation manufacturing solutions provider Aerosud and the South African Council for Scientific and Industrial Research (CSIR) teamed up to launch a challenging 3D printing project, Aeroswift. Aeroswift collaborated with Altair to...

Customer Testimonials

Aeroswift

The South African aviation manufacturing solutions provider Aerosud and the South African Council for Scientific and Industrial Research (CSIR) teamed up to launch a challenging 3D printing project, Aeroswift. Aeroswift collaborated with Altair to...

Customer Stories

Top Use Case Lambda

Optical and Illumination Design Software by Lambda Research Corporation

Customer Stories

Sogeclair社

開発期間の短縮や柔軟な形状を作成できる積層造形と鋳造を組み合わせた開発プロセスにシミュレーションを取り入れることで、開発サイクルの削減と開発期間の短縮に成功した事例

Customer Stories

Safran Seats

Zodiac Seats (now Safran Seats) designs, certifies and assembles innovative, customizable and high-added-value products. For optimizing seat ergonomics to reduce passenger discomfort, Zodiac Seats France (ZSFR) employ Altair HyperWorks to develop ...

Customer Stories

SOGECLAIR aerospace

SOGECLAIR aerospace, part of the SOGECLAIR S.A. group, is a major engineering partner and prime
contractor for the aerospace industry. For the design of an aircraft access door, to leverage the full potential of the combined methods of additive manufacturing and casting, SOGECLAIR used the Altair

Customer Stories, Customer Testimonials

Improving Composite Design and Simulation Efficiency with Multiscale Designer

Dr. Jan-Philipp Fuhr - Managing Partner, Cikoni talks about developing a methodology to analyze and predict composite matrix and fiber failure using Altair OptiStruct and Multiscale Designer resulting in improved accuracy and simulation efficiency...

Customer Stories, Video Testimonials

GE's Aviation Systems Business uses Flow Simulator to Model Aircraft Backup Generator

GE Aviation Systems business has been challenged with providing a backup generator (BUG) to provide electrical power to a new aircraft in the event of multiple failures of other systems.

Customer Stories

APWorks choisit OptiStruct comme outil d'optimisation topologique pour la réalisation d'une moto imprimée en 3D

Le Light Rider est une moto électrique extrêmement robuste et légère conçue par la filiale d'Airbus, APWorks, grâce à l'association de l'optimisation topologique d'OptiStruct et de l'impression 3D.

Customer Stories

Engineering Design Using a Small Autonomous Robot for Student Education

As part of educational programs for students to acquire practical skills and knowledge, Aichi University Technology (AUT) participated in a demonstration test competition aiming for future Mars exploration. A Rocket Launch for International Studen...

Customer Stories

Case Study: Taking the Lead in Formula E - High-Performance Racing with System-Level Modeling

A leading Formula E team approached Maplesoft to develop dynamic models of their car, hoping to find new ways to tweak their systems for optimal performance.

Customer Stories

Case Study: A Smarter Approach to Vehicle Design with System-Level Modeling

By taking a system-level modeling approach, CEVT engineer Michael Palander is creating a powerful testing and simulation platform that can be used to verify the functionality of their new automotive technologies at earlier stages in the design pro...

Customer Stories

Altair and Ziegler Instruments Combine Experience and Technologies to Identify and Eliminate Squeak and Rattle Issues

Altair has partnered with Ziegler-Instruments to enhance its Squeak and Rattle Director (SnRD), making it the most advanced and comprehensive solution on the market to predict and eradicate squeak and rattle phenomena in vehicles, aircraft and oth...

Customer Stories, Videos

Innovative Drone Propulsion Design using Model-Based Development

To assist Kappa Electronics’ customer with controlling the motor for a new drone design, Altair’s solidThinking Embed was used for high speed simulation of motor electronics and control dynamics to develop a novel method of sensorless field-orient...

Customer Stories

航空機開発にイノベーションを起こすJAXAの挑戦

7月25日・26日に開催された「Altairテクノロジーカンファレンス(ATC)」で登壇した国立研究開発法人 宇宙航空研究開発機構(JAXA)の航空技術部門 構造・複合材技術研究ユニット 青木雄一郎様へのインタビューから、現在の航空機開発においてJAXAが果たす役割や挑戦をお伝えする。 *2017/08/21マイナビニュース掲載記事

Customer Stories

Surrogate Models for Antenna Placement on Large Platforms

The RF Engineering group at the Institute of High Performance Computing (IHPC), develops advanced computational electromagnetics and multiphysics algorithms and tools, leveraging vast know-how in EMC for a wide range of applications. Typical chall...

Customer Stories

Maharashtra Institute of Technology, Pune

A university team at MIT, Pune used topology optimization and additive manufacturing to develop two new designs for the Quad-rotor UAV drone that were lighter and stronger than previous designs.  

Customer Stories

Explicit Dynamic Simulation of Tool Drop on the Outer Wing of the Swift020 Unmanned Aerial System using Radioss®

The successful launch of a new platform UAS is a comprehensive design engineering and manufacturing endeavor. The full lifecycle must consider maintenance and replacement components. As these requirements often require the use of tools (i.e. screw...

Customer Stories

Characterizing the Murchison Widefield Array Beam Pattern

A precursor to the SKA, the Murchison Widefield Array (MWA) radio telescope was constructed in the Murchison Radio-astronomy Observatory in Western Australia. In order to correctly calibrate and image the data collected by the radio telescope, it ...

Customer Stories

Sintavia

Sintavia utilized Altair Inspire to prove the ability to additively manufacture optimized aerospace replacement parts that exceed existing part performance while decreasing
the overall weight.

Customer Stories

Sintavia(英語)

Sintavia utilized solidThinking Inspire to prove the ability to additively manufacture optimized aerospace replacement parts that exceed existing part performance while decreasing
the overall weight.

Customer Stories

【日本語字幕】3Dプリンティングによる航空機のエンジンパイロンのコンセプト生成 - Sogeclair Aerospace

Sogeclair Aerospace社は、プリポストにHyperMeshとHyperViewを、トポロジー最適化にOptiStructを使って、3Dプリンティング製航空機エンジンパイロンの20%の軽量化と、90%以上の部品の削減に成功しました。

Customer Stories, Video Testimonials, Videos

3D積層造形する人工衛星部品(日本語)

世界No.1の独立系の宇宙関連部品サプライヤーRUAG Space社が、3D積層造形する地球観測衛星SENTINEL 1B用部品の設計にHyperWorksを使う理由

Customer Stories, Videos

Top Use Cases: SimData Manager

Presentation introducing a few of the top use cases for the simulation data management software, SimData Manager.

Customer Stories

3Dプリンティング製 人工衛星コンポーネント

人工衛星や計器の構造物の設計 / 製造 / 試験を請け負うRUAG Space社の専門家は、この度パイロットプロジェクトの一環として、積層造形法(AM)を用いて地球観察衛星向
けアンテナ支柱を設計 / 製造しました。(Concept to Reality 2016掲載)

Concept to Reality, Customer Stories

Application of FEKO in EM Protection Design for Electromagnetic Effects of Civil Aircraft

In the limited space of a plane, a lot of radio equipment, especially antennas are installed, leading to concerns about antenna pattern distortion caused by the plane body and inter-antenna isolation.

COMAC, Shanghai Aircraft Design and Research Institute continues selecting FEKO to improve the

Customer Stories

Top Use Cases: KTex Family

Presentation introducing a few of the top use cases for the composites software, KTex Family.

Customer Stories

SOGECLAIR Aerospace Employs HyperWorks to Optimize Additively Manufactured Aircraft Components: Topology optimization of a large engine pylon structure

To find new development and manufacturing approach to reduce weight while ensuring safety, HyperWorks offers SOGECLAIR Aerospace an innovative, streamlined development environment with more design freedom, faster development cycles, and lower cost...

Customer Stories

The SKA Radio Telescope: A Global Project for a Better Understanding of the Universe

Challenging Einstein’s seminal theory of
relativity to the limits, how the very first
stars and galaxies formed just after the Big
Bang, the study of dark energy and the vast
magnetic fields in the cosmos, and the age
old question “Are we alone in the Universe?”
These are some of the key scien

Customer Stories

【Altair情報誌】Concept to Reality Japan Winter/Spring 2015- 日本語版

米国本社Altair Engineering, Inc.が発行する技術情報誌「Concept to Reality」の翻訳記事に、日本独自の技術、製品、イベント情報を追加したものです。【INDEX】トポロジー最適化と3D プリンティングの組み合わせが設計のイノベーションを加速 / 業務用電動工具の開発を支えるシミュレーションテクノロジー / NASA が複合材機体の被雷時の損傷を検出するワイヤレスセンサーを開発 / JSF のパイロットの体温上昇を抑える冷却ユニット / 最適化テクノロジー...

Concept to Reality, Customer Stories

【事例】JSFのパイロットの体温上昇を抑える冷却ユニット - AMETEK

AMETEK 社は、モデルベースの組み込み開発システムにより、冷却ユニット制御システムの設計、シミュレーション、ファームウェアの作成、稼動確認を実施しました。

Customer Stories

NASA Develops Wireless Sensors to Detect Lightning Strike Damage to Composite Aircraft

Computational electromagnetic software enables a team of researchers at NASA’s Langley Research Center to develop wireless resonant sensors that can measure and mitigate lightning strike damage to composite aircraft.

By Beverly A. Beckert
Concept To Reality Winter/ Spring 2015

Customer Stories

NASA开发出用于检测复合材料飞机所受雷击损害的无线传感器

NASA兰利研究中心的一个研究小组借助计算电磁学软件开发出了一款无线谐振式传感器,它可以测量并减轻雷击对复合飞机造成的损害。

By Beverly A. Beckert
Concept To Reality Winter/ Spring 2015
Subscribe to C2R Magazine

Customer Stories

拓扑优化与激光增材制造的完美结合挖掘轻量化结构的新潜力

挑战:如何利用开发设计和优化方法,从而改进采用激光增材制造方法生产的部件。

Altair解决方案:HyperWorks、OptiStruct 和仿真驱动设计流程。

优点:提高材料利用效率;使结构更轻、更坚固;所需的用户培训更少;制造流程灵活、可进行调整。

Customer Stories

Combining topology optimization with laser additive manufacturing reveals new potential for lightweight structures

Challenge: Development of design and optimization methods to improve components made with laser additive manufacturing methods.

Altair Solution: HyperWorks, OptiStruct, Simulation Driven Design Process

Benefits: increased material efficiency, lighter and stiffer structures, less user training

Customer Stories

Failure Criteria for Stamping Analysis in Radioss

In this paper, several failure criteria are compared in their ability to predict necking point and failure propagation during a forming process. The paper has been presented at the 2014 IDDRG Conference in Paris, France.

Customer Stories

RADIOSS 钣金成形的失效准则

在本文中,介绍了几个失效准则并对预测缩颈点和失效扩展等进行了比较。该论文在法国巴黎举行的2014 IDDRG会议上被演讲。

Customer Stories
69 结果

快速知晓

订阅信息速递了解产品培训、新闻、活动等信息